How to reset Brother DCP Printer

The following did!

- pull out the AC plug
- put back the AC plug while holding down the “menu” button and keep holding it (15 sec)
- now you are entering the MAINTENANCE mode and “error 46” pops up in the display
- select 8 by using the arrow buttons ,push OK and select 0 and push OK
- 00:00 00:01 OK (the display is showing this message)
- now push the MONO button 25 times until you see PURGE: xxxxx
- Select 2, push ok, select 7,push ok,select 8,push ok, select 3,push ok
- the purge counter indicates now: purge: 00000
- switch off the printer ,switch it on
- ready to print

CANON MP150 / MP145 / MP160 SERVICE CALL ERRORS

LED DISPLAY	ERROR (ERROR CODE)	PARTS LIKELY TO BE FAULTY
E 2 2	Carriage Error (5100)	- Carriage unit (main unit) - Timing slit strip film - Logic board ass’y - Carriage motor (main unit)
E 2 3	Paper Feed Error (6000)	- Timing sensor ass’y - Timing slit disk film (main unit) - Feed roller ass’y (main unit) - Logic board ass’y - Paper feed motor (main unit)
E 2 4	Purge cam sensor error (5C00)	- Carriage unit (main unit) - Timing slit strip film - Logic board ass’y - Carriage motor (main unit)
E 2 5	ASF Cam sensor error (5700)	- Drive ass’y (main unit) - PE Sensor ass’y - Pressure roller ass’y (main unit)
E 2 6	Internal temperature rise error (5400)	- Logic Board Ass’y
E 2 7	Main ink absorber full (5B00) Or Platen ink absorber full (5B10)	- Main ink absorber: Bottom case unit (main unit) Ink absorber kit - Platen ink absorber: Ink absorber Ink absorber kit
E 2 8	Ink cartridge temperature rise error (5200)	- Print head
E 2 9	EEPROM error (6800)	- Logic board ass’y
E 3 2	AP position error (6A00)	- Driver ass’y (main unit) - PE sensor ass’y - Logic board ass’y
E 3 5	USB Host VBUS over current (9000)	- Logic board ass’y
E 3 7	Abnormal motor driver error (9000)	- Logic board ass’y
E 4 0	Other hardware error (6500)	- Logic board ass’y
E 4 2	Scanner error (5010)	- Scanner unit - Logic board assy